QuestSuite ^® Professional Releases:

Auto Registration
A new option has been created in the license menu called Automatic Registration. New users will be able to select this option, fill in a short form and click submit. Their information is then automatically sent to Quest via the Internet and an unlock code is installed on their PC without having to manually type registration codes or enter unlock codes. Unlock codes are only issued if the serial number of their software and type of license they are entitled to is in our database. At least initially, this service is not available to international customers that have purchased QSP through a licensed international dealer. This is due to the fact that Quest does not presently have access to this information from international dealers so that it can be placed in our registration database.

Install requires a serial number
The installation process now prompts for a serial number to be entered during the install. This serial number is used for the new streamlined auto registration process. Once entered, the serial number is stored in the registry.

Vibration Applet Current Setup Option
The current setup checkbox has been removed from the vibration setup dialog.  This was done to avoid confusion over how the setup gets applied to subsequent tests captured by the instrument.

Vibration Applet Combined Test Delete Feature
The ability to delete tests within a combined test was added back into QSP.  This feature was deactivated in an earlier version until corrections could be made to the way deletions were handled.

Vibration Applet Reports
The vibration reports were showing no data for the combined tests and showing multiple tests for single tests.  The problem was how the report generator filtered its tests.  This has been corrected.

Vibration Applet Whole Body Calculator
On the values tab within a vibration test, a whole body calculator has been added.  The exposure is calculated by using the sum factors in the instruments setup during that test.  We now offer a Basic method and VDV method.  VDV method is required by the EC Directive whenever the measured crest factor exceeds 9.

Communication Ports Addition
Communication ports 5-9 were added.

V1.70 Full Install Instructions
Note:
The full install is a self-extracting zip file. Due to it's size, the "Full Install" requires high speed internet access.

1. Click here to download the QSP170Full.exe file. Select "Open/Run".
2. Unzip the file to the default "C:\QSP Updates" directory.
3. Browse to the default "C:\QSP Updates" directory and double click on the "Setup.exe" file. Follow the prompts to finish the install.

Note:
To create an install CD, copy the contents of the QSP Updates directory to a blank CD.
To install from the CD, browse to the CD and select the "Setup.exe" file.

Back to top of Page

Noise PRO App Bugs Resolved:

• Combine tests:
  After combining any number of tests, the total run time for the combined test was displayed incorrectly.

HavPro/Vibration App Bugs Resolved:

• Combine tests:
  After combining any number of tests, the total run time for the combined test was displayed incorrectly.

V1.65 Patch Installation Instructions:
Note:
Version 1.65 only updates Version 1.64 installations!

1. Click here to download and select the "Save" button. Save the file "QUPV163ToV164.exe" to your desktop.
2. From your desktop double click on "QUPV164ToV165.exe" file to start the installation.

V1.65 Full Install Instructions
Note:
The full install is a self-extracting zip file. Due to it's size, the "Full Install" requires high speed internet access.

1. Click here to download the QSP165Full.exe file. Select "Open/Run".
2. Unzip the file to the default "C:\QSP Updates" directory.
3. Browse to the default "C:\QSP Updates" directory and double click on the "Setup.exe" file. Follow the prompts to finish the install.

Note:
To create an install CD, copy the contents of the QSP Updates directory to a blank CD.
To install from the CD, browse to the CD and select the "Setup.exe" file.

Back to top of Page

Noise PRO DLX Bugs Resolved:

• Portugese "Auto On" :
  For the Portugese version only, you were previously not able to enter times into the auto-on run fields for the NoisePro DLX models.

Noise Pro Bugs Resolved:

• Setting up a NoisePro with QSP would sometimes cause later data downloads to fail.

HavPro/Vibration App

• Data would sometimes erroneously repeat inside of a test depending on the length of the test.
• The resolution of the measured and calculated data values now default to tenths instead of whole integers.

V1.64 Patch Installation Instructions:
Note:
Version 1.64 only updates Version 1.63 installations!

1. Click here to download and select the "Save" button. Save the file "QUPV163ToV164.exe" to your desktop.
2. From your desktop double click on "QUPV163ToV164.exe" file to start the installation.

V1.64 Full Install Instructions
Note:
The full install is a self-extracting zip file. Due to it's size, the "Full Install" requires high speed internet access.

1. Click here to download the QSP164Full.exe file. Select "Open/Run".
2. Unzip the file to the default "C:\QSP Updates" directory.
3. Browse to the default "C:\QSP Updates" directory and double click on the "Setup.exe" file. Follow the prompts to finish the install.

Note:
To create an install CD, copy the contents of the QSP Updates directory to a blank CD.
To install from the CD, browse to the CD and select the "Setup.exe" file.

Back to top of Page

• Data downloads from Model 2900 SLM containing multiple sessions would not open properly.

V1.63 Update Installation Instructions:
Note:
Version 1.63 only updates Version 1.62 installations!

1. Click here to download and select "Save this program to disk". Save the file "QUPV162ToV163.exe" to your desktop.
2. From your desktop double click on "QUPV162ToV163.exe" file to start the installation.

Back to top of Page
 

In addition, in this update fixes are provided for the following list of software bugs.

Noise Bugs Resolved:

• Data downloads from NoisePro units randomly fail if the start time of a test is equal to the end time of the previous test.
• In NoisePro setup "Vibrating Alarm" and "Backlight" cannot be selected simultaneously.
• Impulse data downloaded from NoisePro units incorrectly labeled as fast min and max.

Heat Stress Bugs Resolved:

• In the remote control display for the QT-34 and 36 humidity values are wrong when temperature is displayed in Fahrenheit
• In the remote control display for the QT-34 and 36 heat index values are labeled as humidex.
• In the remote control display for the QT-34 and 36 heat index/humidex values are displayed even when dry bulb and/or humidex values are out of range for correct calculation.
• For QT-III reports total run time is shown as zero on the summary page even though data was recorded.
• In the QuestTempII reports, an alarm identifier should be shown when the ear temperature exceeds the alarm point.

Gas Bugs Resolved:

• In the test report summary TWA reported is actually the average.

Vibration Bugs Resolved:

• If combination tests are changed, the user is not prompted to save the file before generating the report. Because of this changes are not shown on the report.

V1.62 Update Installation Instructions:
Note:
Version 1.62 only updates Version 1.60 installations!

1. Click here to download and select "Save this program to disk". Save the file "QUPV162.exe" to your desktop.
2. From your desktop double click on "QUPV162.exe" file to start the installation.

Back to top of Page  

Note: This version 1.6 update, released in April 2004, is not available online. Click Here to contact Quest Technologies and arrange for shipment.

IAQ Bugs Resolved:

• In non-English language versions the logging storage interval did not get correctly stored during setup.

Vibration Bugs:

• When vibration modes are changed in the setup dialog some of the proper default settings were not changed.

Sound Bugs:

• Tests that included no data points produced reports in which summary and setup information were blank.
• On instrument setup page, under the "Integration Threshold" and "Trigger" tabs, some controls were not enabled after loading a setup file.
• On the 1900 SLM QSP failed to compensate for low sensitivity microphones.

Noise Bugs:

• NoisePro datalogging sessions that contained a test that started exactly at the end time of the previous test produced a data conversion error message.
• With NoisePro’s when auto-run was set up in the Date mode, the unit was set to the Timed Run mode.
• In NoisePro’s the secure code did not get properly enabled or programmed after saving and reopening the setup file.

Back to top of Page

Note:
The Version 1.50 update, released in January 2004, is not available online. Click Here to contact Quest Technologies and arrange for shipment.

Gas Monitor Bugs Resolved:

• For SafeLog 100 models with O2 sensor, low alarm level cannot be set.

Heat Stress Monitor Bugs Resolved:

• Alarm relay state is set incorrectly for QuesTemp 15 setup.
• Logging interval is not set correctly for QuesTemp 34 or 36.
• Temperature values in table on Thermal Comfort page are sometimes incorrect.

Noise Dosimeter/Sound Level Meter Bugs Resolved:

• Day of week auto on settings for NoisePro setup select the wrong day.
• Auto run durations not being set correctly for NoisePro setup.
• Auto run duration did not allow setting seconds for NoisePro setup.
• For NoisePro data files, combination tests containing more than one test have incorrectly calculated summary values.
• Backlight, language, and descriptors not being set properly for NoisePro setup.
• LDN flag not being set properly for Q400 setup.
• NoisePro serial numbers were not being forced to upper case before transmission to instrument.
• In reports, LAVG values are not properly labeled as LEQ when appropriate.
• Subject name, company and work area drop lists not being filled in for NoisePro data retrieval dialog.
• In reports for NoisePro DLX/DLX1 models, test summaries show no dosimeter number for the fourth dosimeter.

Vibration Monitor Bugs Resolved:

• In sample setup files, dB reference should be 10e-6 instead of 10e-5.

Back to top of Page

Universal Bugs Resolved:

• If the user opens a file that is not in one of the predefined folders, the next time they want to open a file they have to navigate to the previous location again.
• Displaying test information in a data file that contains many tests may result in QSP crashing. This is a bug in the Microsoft Jet 4.0 database engine used with QSP. Jet 4.0 Service Pack 6, which fixes the problem, is part of the QSP 1.40 installation.
   

Heat Stress Monitor Bugs Resolved:

• When using remote control with a QT-34 or QT-36 with multiple sensor bars, switching between sensor bar tabs does not change the displayed values.

Sound Level Meter Bugs Resolved:

• LN values and labels are mismatched.

Noise Dosimeter/Sound Level Meter Bugs Resolved:

• Wrong exchange rates are shown when retrieving setup information from a Q-400.

Vibration Monitor Bugs Resolved:

• Sum channel history values are forced to zero if peak is not recorded.

V1.40 Installation Instructions:
Note:
Version 1.40 only updates Version 1.30 and Version 1.20 installations!

1. Click here to download and select "Save this program to disk". Save the file "QUPV140.exe" to your desktop.
2. From your desktop double click on "QUPV140.exe" file to start the installation.

Back to top of Page

Gas Monitor Bugs Resolved:

• Gas applet reports in Italian version prompts user for a subreport link value.

Heat Stress Monitor Bugs Resolved:

• Remote control does not work with QT-34 instruments.

Noise Dosimeter/Sound Level Meter Bugs Resolved:

• Cannot retrieve data from a 2900 instrument when it is in session mode.
• Reports include the units string "dB" beside each numeric value in the time history section – this interferes with exporting to spreadsheet format.

V1.30 Installation Instructions:
Note:
Version 1.30 only updates Version 1.20 installations! If you try to patch a pre-1.20 installation, an error message will state that the installation has failed, it will not harm or otherwise change the pre-1.20 installation, but the result will not be a QSP version 1.30 installation.

1. Click here to download and select "Save this program to disk". Save the file "QUPV130.exe" to your desktop.
2. From your desktop double click on "QUPV130.exe" file to start the installation.

Back to top of Page

V1.20 Update
In this update, foreign language support was added in French, German, Spanish, and Italian plus fixes are provided for the following list of software bugs.

Note:
The Version 1.20 update, released March 2003, is not available online. Click Here to contact Quest Technologies and arrange for shipment.

Gas Monitor Bugs Resolved:

• Unable to switch between Fahrenheit and Centigrade in charts, graphs, and when displaying summary values.

Heat Stress Monitor Bugs Resolved:

• Unable to switch between Fahrenheit and Centigrade in charts, graphs, and when displaying summary values.

IAQ Monitor Bugs Resolved:

• Unable to switch between Fahrenheit and Centigrade in charts, graphs, and when displaying summary values.

Noise Dosimeter/Sound Level Meter Bugs Resolved:

• With some model dosimeters could not create combination tests with data from multiple units.
• Summary data calculations when combining tests were incorrect.
• Some sound instruments primarily the 1900/2900 cannot be setup using QSP; the instrument either shuts off or generates communication errors.

Back to top of Page

V1.01 Update
In this update fixes are provided for the following list of software bugs.

General Bugs Resolved:

• When viewing a chart in a data file, if you right click on a line on the chart type and change it to a bar chart the time scale disappears and does not return when changing back to a line chart.
• Run times greater than 24 hours are inaccurate. For example, if a test is run for 28 hours and 30 minutes, run time is shown as 4 hours and 30 minutes, not 1 day 4 hours and 30 minutes.
• In Windows 98 if you add entries to the User and/or Instrument database exit QSP and reopen the program those entries previously entered are not there.
• In the export function of the report window a choice exists to export the report as an HTML file, but when searching for the result it does not exist on the system.
• When data is downloaded from an instrument to QSP, QSP creates a temporary file to hold the data until the user saves it. Shortcuts to those temporary files appear on the users desktop and must be manually removed.
• When data is downloaded from an instrument to QSP, QSP creates a temporary file to hold the data until the user saves it. Shortcuts to those temporary files appear on the users desktop and must be manually removed.
• Using the "Save As" option not only creates a new file with the assigned name, but also overwrites the old file as well.
• In its initial release QSP was not to use re-usable reference codes, so copying them to the clipboard was not done. This has been rethought and reference codes are now re-usable. Auto copying them to the clipboard would make reuse by the user an easier option.

Gas Monitor Bugs Resolved:

• In both the single gas and multi-gas loggers CO, H2S, and NH3 toxic sensors could have their alarm values programmed incorrectly by QSP. It is a decimal point positioning problem. On these sensors that display units in XXX., QSP programs the alarm values as XX.x.
• Gives units for O2 display as ppm, not %.
• The reports show data for alarms in many of the tests however, if you look at the corresponding alarm tab for each test there may or may not be any alarms shown. Also, in the alarms tab there is sometimes more than one alarm listed by number, but no detail for the alarms.
• Some sensor configurations on multigas units that contain less than four sensors result in QSP reporting back a "Communication Error".
• On the reports page all the sensor information is present except the sensor serial number.

Heat Stress Monitor Bugs Resolved:

• QSP crashes with message "Invalid page fault in module MFC42.DLL" when retrieving data from QT-2 or QT-15.

IAQ Monitor Bugs Resolved:

• When creating a new setup file for the aq-5000 if the sample rate is set to 1 minute sample and the file is saved and then re-opened, the restored sample rate shown is the default 1 second. However, the setup file still denotes a sample rate of 1 minute. All other sample rates are correct when opening the setup file.
• When setting up the analog input channel through QSP the scaling between QSP and the unit does not match.
• If the reports are selected to print out in Celsius the number changes to Celsius, but the designator stays as (F)ahrenheit.

Noise Dosimeter/Sound Level Meter Bugs Resolved:

• The noise applet has a field shown in the values tab that is Pa2Sec or Pa2Hr. This field is currently labeled with dB for units. It should not have a units label at all since it is implicit in the field that it is in seconds.
• Problems here are various. QSP will turn off the meter halfway through retrieving the setup. QSP will report unit set up for PEAK response, when unit is set for FAST. QSP will report various display options turned on that are not. Selected in the unit.
• In the Q-300 applet, the Projected Dose calculations under the individual tests are not correct.
• When sending settings to a Q-300 that has data in it, QSP warns that further action will reset the unit and it appears to proceed correctly. But immediate retrieval of the setting reveals that the setup was not changed nor was the unit reset.
• When selecting a one-minute logging interval in QSP, QSP will program the unit for a zero interval. All other intervals appear to program correctly.
• Not all the pertinent information relating to date and time gets reported in the reports.
• Security code sent to unit by QSP is not getting changed during this setup operation.

V1.01 Installation Instructions:

1. Click here to download and select "Save this program to disk". Save the file "QUPV101.exe" to your desktop.
2. From your desktop double click on "QUPv101.exe" file to start the installation.

Back to top of Page